FUNDAMENTALS OF ENGINEERING DESIGN

TENTH TEAM DESIGN PROBLEM ASSIGNMENT
(BLENDS)

1.   Create (in teams of two students) the object at the bottom of this page with the Pro/E software.

2.   Use the straight parallel blend method of feature creation.

3.   Select your own English dimensions.

4.   Keep all dimensions in proportion.

5.   Create three default datum planes.

6.   Create a default coordinate system.

7.   Use the front DTM as the sketch plane.

8.   Align the bottom of the square end profile to the top DTM.

9.   Center all profiles across the right DTM.

10.  Use a minimum of four (4) profiles.

11.  Add two (2) cylinders to the final profile.

12.  Orient the object as illustrated below (isometric). 

13.  Design the object so it looks like the following item.

14.  Place the object on the screen for evaluation.

 
NOTE: If the design object is not in proportion, is not of the proper appearance or
is not properly oriented, the assignment will be considered not complete.
A failing grade will be awarded.