FUNDAMENTALS OF ENGINEERING DESIGN

EIGHTH TEAM DESIGN PROBLEM ASSIGNMENT
(ENGINEERING DRAWING)

 

1.    Create (in teams of two students) the dimensioned engineering drawing of the L-bracket pictured below.

2.    Use chapter 7 of the Duff and lesson 8 of the Toogood texts as references.
     Place all dimensions according to the ANSI rules of dimensioning.

3.    Your drawing must show all of the dimensions illustrated below plus:

              A.   Large hole location dimensions.

              B.   Second small hole location dimensions and hole note.

              C.   You and your partner's name.

              D.   Each hole axis or center line.

              E.   The four views oriented as illustrated below.

              F.   Large radius dimension.

4.     Place the drawing on the screen for evaluation.

 

sd7.jpg (6481 bytes)