/*Sensor Reading*/

int analogSensor0 = 0;
int analogSensor1 = 1;

int sensorValue0 = 0;
int sensorValue1 = 0;

void setup() {
  //configure serial connection:
  Serial.begin(9600);
}

void loop() {
  //read the analog sensor
  sensorValue0 = analogRead(analogSensor0);
  sensorValue1 = analogRead(analogSensor1);

  //print results in raw binary value followed by ASCII value for that binary
  //Serial.print(sensorValue0, DEC);
  //Serial.print(":");
  //Serial.print(sensorValue0, BYTE);
  //Serial.print(" , ");
  //Serial.print(sensorValue1, DEC);
  //Serial.print(":");
  //Serial.println(sensorValue1, BYTE);
  
  //OR print results in raw binary value only
  Serial.print(sensorValue0, DEC);
  Serial.print(",");
  Serial.println(sensorValue1, DEC);
  
  //OR print results in ASCII only (good for network protocols and human readable)
  //Serial.println(sensorValue0, BYTE);
  //Serial.println(sensorValue1, BYTE);
}